Author Topic: How to properly embed YouTube Videos  (Read 11891 times)

0 Members and 1 Guest are viewing this topic.

Offline Phi

  • RPM Knight
  • ****
  • Posts: 14838
  • Country: io
    • View Profile
How to properly embed YouTube Videos
« on: May 18, 2015, 07:22:27 AM »
NOTE: The newly implemented [youtube] button DOES NOT work.

As many of you know, there has been a "Device Support" error, whenever an attempt was made to embed a YouTube video.

After collaborating with Quickie to alleviate the problem, a new mod was installed.

1) The [yt][/ yt] method

Using this BBCode:
[yt]{youtube ID}[/ yt]
(minus the spacing)

YouTube videos can be displayed correctly; simply add the link between both "yt" codes. However, there is a minor downside to this: When posting your link in the message body, the forum will mandate that you to add something to the message body. Essentially, the forum thinks that the body is empty, since the YouTube link, alone, does not count as a message.

All you need to do is write something in the message body after posting the YouTube video. Thus, it will no longer be "empty" and the post will go through successfully.

2) The "" method

I have found an alternate way to post the videos. This method requires some tampering with the YouTube link url.

Let's use an example:
http: //
(minus the spacing)

Instead of the usual address, simply remove the www, .com and the watch?v= from the address.

Lastly, change youtube into

This leaves you with the quote above. And with this method, you don't have to worry about adding a message to the body.

Just post the video by itself, and it will go through successfully.

Like so:

<a href="" target="_blank" class="aeva_link bbc_link new_win"></a>

And that pretty much wraps it up. I hope the descriptions were simple enough to understand.

If you have any questions, ask away.
« Last Edit: May 19, 2015, 10:25:15 PM by Clementine »

Offline ViperAcidZX

  • Blastia researcher and
  • Master's Unit
  • *
  • Posts: 4494
  • Country: us
  • Gender: Female
    • View Profile
    • -Lousy Artist since 1991-
Re: How to properly embed YouTube Videos
« Reply #1 on: May 18, 2015, 07:42:05 AM »
To give Method 2 a test run...

As a tip, getting the link from "Share" saves you the trouble of changing "http:// www. watch?v=YouTubeID" to "" but it still gives you the "https://" part before the link.

So far it's working pretty good. Now everybody can see this.